Home arrow CEMS Equipment arrow Accessories
Home
Configuring a Spectrometer
MB Velocity Transducers
Mössbauer Drive Units
Digital Function Generators
MB Velocity Calibrator
Data Acquisition Units
Low Temperature Equipment
High Temperature Equipment
CEMS Equipment
Data Evaluation Software
Power Supply
Mechanical Setup
Mössbauer Sources
Radiation Protection Devices
High Velocity Drive Systems
Our Support on Location
Contact
Downloads
Imprint
Print E-mail

CEMS
 Accessories

  Image

RiKon-5-AC Anode Wire Cassette

The RiKon-5-AC Anode Wire Cassette allows an easy and replacement of the anode wire within a few minutes. It is simply inserted into the RiKon-5 detector without need of touching the sensitive anode wire aor any adjustment work. The cassette is delivered in a stable plastic box with a foam plastic padding, usable for safekeeping.

  Image

Pressure Regulator Valve Type HSB-240-0105

  In order to create a sufficiently weak counting gas flow through the RiKon-5 CEMS detector, a pressure regulator has to be used, which permits a very fine gas flow adjustment. Well suited for this purpose is the regulator valve type HSB 240-0105 from Air Liquide.

The cylinder regulator is screwed on the top of the cylinder containing the counting gas and connected to the CEMS system by a flexible tube. 

This tube should be impermeable to water vapour in particular if RiKon-5 is used at low temperatures.

  • Primary pressure:  240 bar
  • Control range:  0.01 to 0.1 bar
  • Capacity: 0.5 m3/h
  •  

     

         
     
    © 2017 WissEl - Wissenschaftliche Elektronik GmbH
    Joomla! is Free Software released under the GNU/GPL License.