Home arrow High Velocity Drive Systems
Home
Configuring a Spectrometer
MB Velocity Transducers
Mössbauer Drive Units
Digital Function Generators
MB Velocity Calibrator
Data Acquisition Units
Low Temperature Equipment
High Temperature Equipment
CEMS Equipment
Data Evaluation Software
Power Supply
Mechanical Setup
Mössbauer Sources
Radiation Protection Devices
High Velocity Drive Systems
Our Support on Location
Contact
Downloads
Imprint
Print E-mail
Mössbauer Drive Systems
 Standard and High Velocity Options

Image
MR-260AH with MVT-1000H
Differences between Standard Velocity Transducers and High-velocity Transducers:

  • Standard velocity transducers are equipped with 0.8 mm epoxy guide springs
  • Optionally standard transducers can be equipped with 1.0 mm guide springs
  • High Velocity Transducers are equipped with 1.5 mm multilayer guide springs
Features of the WissEl High Velocity Drive Units: 3/12 NIM module
  • Four front panel 10- turn potentiometers for adjusting the feedback loop
  • Rear panel fan cools the power stage of the unit
  • Rear panel connectors for optional external power supply





Maximum Velocities of Various Velocity Transducers:
  • Standard drive systems with 0.8 mm guide springs: approx. 200... 300 mm/s
  • Velocity transducers with 1.0 mm guide springs: approx. 300 ...450 mm/s
  • High Velocity Drive Systems: > 1000 mm/s

 

 

Image The rigidness of the guides spring dictates - as well as the moving mass - the resonance frequency of the velocity transducer. For reaching high velocities, the mechanical amplitude has to be small and this is reached by stiff springs.The picture shows the upper guide spring of a MVT-1000 velocity transducer.

 

 

 

 

 

 

 

 


Velocity Transducers 
  • MA-260SH 
  • MVT-1000H 
Drive Units MR-260AH 
  • MR-360H 
  • MDU-1200H 

 

 
© 2017 WissEl - Wissenschaftliche Elektronik GmbH
Joomla! is Free Software released under the GNU/GPL License.